Products PicoNodePDH

PicoNodePDH
Optimized and Miniaturized Ethernet over PDH Solution

PicoNodePDH™ is a highly integrated and miniaturized ultra lower power framer capable of mapping Ethernet traffic into bonded PDH payloads for transport in copper-based telecom access networks. It supports a E/FE/GigE LAN port and multiple DS3/E3 or DS1/E1 WAN ports.

Interfaces

• Equipment / client side:
• Ethernet / Fast Ethernet via MII/SS-SMII
• Gigabit Ethernet via GMII
• Line / trunk side:
• 2 x DS3/E3
• 4 x DS1/E1

• Network Access Equipment
• BTS/NODE B Backhaul Equipment
• Wireless Radio Equipment
• Protocol Converters
• I/O Modules
• Test Equipment
• for more applications please visit our solutions catalog

• Supported by Galazar’s comprehensive line of robust, integrated software solutions
• 2 x DS3/E3 network interfaces
  • C-bit parity for DS3 and G.832 for E3
  • 1+1 protected or fully independent
• 4 x DS1/E1 network interfaces
• 1 E/FE/GE LAN interface
  • 802.3x flow control with internal buffering
  • 802.3ah EFM OAM packets
  • Class of Service support
• Packet/Frame encapsulation using G.7041 GFP, X.85/X.86 LAPS or RFC 1662 HDLC
• Virtual Concatenation and LCAS
  • N x DS3/E3 using G.7043 and G.8040
  • N x DS1/E1 using G.7043 and G.8040
  • Support for maximum differential delay compensation in all modes
• Miniaturized to 11mm x 11mm
• Less than 0.5W for most applications

PicoNodePDH is an Optimized and miniaturized Ethernet over PDH solution is designed to enable rapid development of next-generation Metro Ethernet transport interfaces for existing, widespread copper-based PDH infrastructures. Flexible Gigabit and 10/100 Mb/s Ethernet client ports facilitate support for a wide variety of Ethernet-based platforms including Mobile Backhaul, Enterprise Data and Network Access equipment. Integrated DS1/E1 and DS3/E3 network ports also allow for transport over a variety of leased or owned facility types.

Using standardized Virtual Concatenation, individual transport links can be bonded together into higher capacity virtual links. The integrated Link Capacity Adjustment Scheme (LCAS) protects against member link failures and also provides a mechanism for increasing or decreasing the bandwidth of any virtual link by changing the number of members. PicoNodePDH supports both Frame Mapped GFP and HDLC-based packet encapsulation to provide compatibility with existing and emerging network equipment from multiple vendors.

As with all Galazar IC technology, PicoNode is fully integrated with Galazar's industry leading and field proven configuration and management framework. This framework provides advanced capabilities such as warm start, interrupt management and a wide variety of troubleshooting tools, and is accompanied by extensive hyperlinked documentation and customer system support.

Sample Solution : Media Conversion at 45/90 Mbps

Sample Solution : Ethernet over 4xE1/DS1

For more sample solutions, please visit our solutions catalog.

More Information and Contact Info

For more information on the Galazar family of products, please contact your Galazar Networks Sales representative at
http://www.galazar.com/contact/sales.html.

Galazar Networks and the Galazar Networks logo are registered trademarks of Galazar Networks Inc. The information found in this document is subject to change without notice. This material is provided on an "as is" basis. Galazar Networks Inc. makes no representation or warranties of any kind, expressed or implied arising out of the application or use of any product described herein, neither does it convey any license under its patent rights, copyrights, or trade secrets nor the rights of others. This document is the property of Galazar Networks Inc. No part of this publication may be copied, reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic, photographic, or otherwise, or used as the basis for manufacture or sale of any items without the prior written consent of Galazar Networks Inc.

Return to Top